SAMPLE — NOT FOR JOBSITE USE
Low-slope membrane installation JHA Example
This educational roofing example is generated from draft bank version 2026.07.20-ai1 and remains noindex until safety review.
| Clause | Control | Citation |
|---|---|---|
| CTL-FALL-001 | Employees on walking or working surfaces with unprotected sides or edges 6 feet or more above a lower level shall be protected by guardrail systems, safety net systems, or personal fall arrest systems unless a specific Subpart M alternative applies. | 29 CFR 1926.501(b)(1) |
| CTL-FALL-002 | Personal fall arrest systems shall be inspected before each use for wear, damage, and other deterioration, and defective components shall be removed from service. | 29 CFR 1926.502(d)(21) |
| CTL-HEAT-001 | The employer heat-illness prevention plan should account for heat conditions and workload; provide adequate cool drinking water, rest breaks, and a shaded or cool recovery area; gradually acclimatize new and returning workers; train workers and supervisors to recognize and respond to heat illness; and require 911 activation with immediate aggressive cooling for suspected heat stroke. | |
| CTL-FIRE-001 | Suitable fire-extinguishing equipment shall be immediately available in the work area and shall be maintained in a state of readiness for instant use. | 29 CFR 1926.352(d) |
| CTL-FIRE-002 | When torch-applied or other hot work is such that normal fire prevention precautions are not sufficient, additional personnel shall be assigned to guard against fire while the work is in progress and for a sufficient period after completion to ensure that no possibility of fire exists. | 29 CFR 1926.352(e) |
| CTL-FIRE-003 | Objects to be heated with a torch shall be moved to a designated safe location, or all movable fire hazards in the vicinity shall be taken to a safe place; where fire hazards cannot be moved, guards shall confine the heat, sparks, and slag. | 29 CFR 1926.352(a); 29 CFR 1926.352(b) |