SAMPLE — NOT FOR JOBSITE USE
Metal-panel roofing JHA Example
This educational roofing example is generated from source-mapped clause bank version 2026.08.28-ai3.
| Clause | Control | Citation |
|---|---|---|
| CTL-FALL-001 | Employees on walking or working surfaces with unprotected sides or edges 6 feet or more above a lower level shall be protected by guardrail systems, safety net systems, or personal fall arrest systems unless a specific Subpart M alternative applies. | 29 CFR 1926.501(b)(1) |
| CTL-FALL-002 | Personal fall arrest systems shall be inspected before each use for wear, damage, and other deterioration, and defective components shall be removed from service. | 29 CFR 1926.502(d)(21) |
| CTL-FALL-004 | Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds per employee attached, or shall be designed, installed, and used as part of a complete personal fall arrest system that maintains a safety factor of at least two, under the supervision of a qualified person. | 29 CFR 1926.502(d)(15) |
| CTL-HEAT-001 (recommended practice) | The employer heat-illness prevention plan should account for heat conditions and workload; provide adequate cool drinking water, rest breaks, and a shaded or cool recovery area; gradually acclimatize new and returning workers; train workers and supervisors to recognize and respond to heat illness; and require 911 activation with immediate aggressive cooling for suspected heat stroke. | Recommended practice OSH Act Section 5(a)(1); OSHA Heat Exposure prevention guidance |
| CTL-MATERIAL-001 | Materials stored in tiers shall be stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling, or collapse. | 29 CFR 1926.250(a)(1) |
