SAMPLE — NOT FOR JOBSITE USE
Roof cleanup and demobilization JHA Example
This educational roofing example is generated from source-mapped clause bank version 2026.08.28-ai3.
| Clause | Control | Citation |
|---|---|---|
| CTL-PPE-001 | Employees exposed to possible danger of head injury from impact, falling or flying objects, or electrical shock and burns shall be protected by protective helmets. | 29 CFR 1926.100(a) |
| CTL-PPE-002 | Where there is a potential for objects falling to a lower level, each exposed employee shall wear a hard hat, and the employer shall erect toeboards, screens, or guardrail systems to prevent objects from falling, or erect canopy structures and keep potential fall objects far enough from the edge, or barricade the area to which objects could fall and prohibit employees from entering it. | 29 CFR 1926.501(c); 29 CFR 1926.502(j) |
| CTL-PPE-003 | Personal protective equipment shall be of safe design and construction for the work to be performed, and shall be selected to ensure that it properly fits each affected employee. | 29 CFR 1926.95(c)(2) |
| CTL-FALL-001 | Employees on walking or working surfaces with unprotected sides or edges 6 feet or more above a lower level shall be protected by guardrail systems, safety net systems, or personal fall arrest systems unless a specific Subpart M alternative applies. | 29 CFR 1926.501(b)(1) |
| CTL-FALL-002 | Personal fall arrest systems shall be inspected before each use for wear, damage, and other deterioration, and defective components shall be removed from service. | 29 CFR 1926.502(d)(21) |
| CTL-FALL-004 | Anchorages used for attachment of personal fall arrest equipment shall be independent of any anchorage being used to support or suspend platforms and capable of supporting at least 5,000 pounds per employee attached, or shall be designed, installed, and used as part of a complete personal fall arrest system that maintains a safety factor of at least two, under the supervision of a qualified person. | 29 CFR 1926.502(d)(15) |
| CTL-HEAT-001 (recommended practice) | The employer heat-illness prevention plan should account for heat conditions and workload; provide adequate cool drinking water, rest breaks, and a shaded or cool recovery area; gradually acclimatize new and returning workers; train workers and supervisors to recognize and respond to heat illness; and require 911 activation with immediate aggressive cooling for suspected heat stroke. | Recommended practice OSH Act Section 5(a)(1); OSHA Heat Exposure prevention guidance |
| CTL-FALL-003 | Each employee on a walking or working surface shall be protected from falling through holes, including skylights, more than 6 feet above lower levels by personal fall arrest systems, covers, or guardrail systems erected around such holes; covers shall support at least twice the expected load, be secured against displacement, and be color coded or marked HOLE or COVER. | 29 CFR 1926.501(b)(4); 29 CFR 1926.502(i) |
