SAMPLE — NOT FOR JOBSITE USE
Steep-slope shingle installation JHA Example
This educational roofing example is generated from draft bank version 2026.07.20-ai1 and remains noindex until safety review.
| Clause | Control | Citation |
|---|---|---|
| CTL-PPE-001 | Employees exposed to possible danger of head injury from impact, falling or flying objects, or electrical shock and burns shall be protected by protective helmets. | 29 CFR 1926.100(a) |
| CTL-PPE-002 | Where there is a potential for objects falling to a lower level, each exposed employee shall wear a hard hat, and the employer shall erect toeboards, screens, or guardrail systems to prevent objects from falling, or erect canopy structures and keep potential fall objects far enough from the edge, or barricade the area to which objects could fall and prohibit employees from entering it. | 29 CFR 1926.501(c); 29 CFR 1926.502(j) |
| CTL-FALL-001 | Employees on walking or working surfaces with unprotected sides or edges 6 feet or more above a lower level shall be protected by guardrail systems, safety net systems, or personal fall arrest systems unless a specific Subpart M alternative applies. | 29 CFR 1926.501(b)(1) |
| CTL-FALL-002 | Personal fall arrest systems shall be inspected before each use for wear, damage, and other deterioration, and defective components shall be removed from service. | 29 CFR 1926.502(d)(21) |
| CTL-HEAT-001 | The employer heat-illness prevention plan should account for heat conditions and workload; provide adequate cool drinking water, rest breaks, and a shaded or cool recovery area; gradually acclimatize new and returning workers; train workers and supervisors to recognize and respond to heat illness; and require 911 activation with immediate aggressive cooling for suspected heat stroke. |